Operation Manual

CHAPTER 4 BASIC OPERATION

4-3

7. Setting the number of copies

Use the numeric keys to enter the desired number of copies on

the message display. Up to 999 copies can be set.

NOTE

• It is possible to lower the limit on the number of copies that can

be set at a time. (See “Preset limit” on page 6-33.)

8. Starting copying

Press the [Start] key. If the Start indicator is lit green and “Ready

to copy.” is displayed on the message display, copying is pos-

sible.

Start

Stop/

Clear

Reset

1 2 3

4 5 6

7 8 9

6. Copy quality selection

Copy quality is selected according to the original. Touch the [User

choice] key and [Orig image quality] key to open the “Orig. image

quality” screen.

Text+Photo mode:

Touch the [Text+Photo] key to highlight it. Set this mode to copy

originals with mixed text and photo.

Photo mode:

Touch the [Photo] key to highlight it. With this mode, a dimentional

effect of photo is added.

Text mode:

Touch the [Text] key to highlight it. With this mode, pencil and fine

lines are clearly copied.

NOTE

• The default copy quality mode used in the initial mode can be

selected. (See “Exposure mode” on page 6-25.)

• The copy exposure can be adjusted in all copy quality modes.

(See “Manual exposure adjustment (Mixed)” on page 6-30, and

“Manual exposure adjustment (Text)” and “Manual exposure ad-

justment (Photo)” on page 6-31.)

Metric specifications

Inch specifications

Metric specifications

Inch specifications