Operation Manual

CHAPTER 6 COPIER MANAGEMENT
6-12
Auto shut-off time
Auto preheat time
Select copy output
mode (optional)
Select FAX output mode
(optional)
Select the main mode
(optional)
Key sound ON/OFF
Silent mode
Date/Time
Time difference
Management code
change
Auto shut-off ON/OFF
Selects the length of time that you want to elapse
when the copier is not used. The auto shut-off
function automatically turns the power to the
copier OFF. It is possible to set this time to any
15 minute increment between 15 and 240 min-
utes. It is also possible to deactivate the auto
shut-off function.
The factory default setting is 60 minutes.
*It is recommended that you extend the time
before the auto shut-off function engages if the
copier is used relatively frequently, and shorten
that time when it is used infrequently.
Select the length of time that you want to elapse
– after copying ends – before the energy-sav-
ing auto preheat function is engaged. The set-
ting can be made to any 1-minute increment
between 1 minute and 45 minutes, 60 minutes,
90 minutes, 120 minutes, 180 minutes or 240
minutes.
Selects whether to eject copied paper to copier
or either the document finisher or job separator.
*This setting is not displayed when the copier is
not equipped with the optional document finisher
or job separator.
Selects where to eject facsimile paper: the in-
ner tray, job separator, document finisher or mail-
box.
*This setting is not displayed when the copier is
not equipped with the optional document finisher
or job separator.
Selects the initial screen displayed when the
power is turned ON.
Selects whether you want the “beep” that sounds
when you touch the touch panel to be turned
ON or OFF.
The copier can be switched to the silent mode,
which stops the motor inside the copy machine
immediately after copying has been finished.
When “ON” is selected, the motor stops imme-
diately after copying has been finished.
Sets the current time for using the optional scan-
ner function.
Sets the time difference for using the optional
scanner function.
Changes the pin code that gives you access to
the various default settings and management.
*If you do change the management pin code,
however, be sure to keep a note of the new code.
If you do happen to forget the pin code, consult
your service representation.
Selects whether you want the auto shut-off time
function to be turned ON or OFF.
15 to 240 (min)
1 to 45, 60, 90, 120,
180 and 240 (min)
Inner tray, Job sepa-
rator, Finisher main
tray, Finisher sub
tray
Inner tray, Job sepa-
rator, Finisher sub
tray, Mailbox 1
Copy mode, FAX
mode
ON/OFF
ON/OFF
Year: 2000 to 2099
Month: 1 to 12
Day: 1 to 31
Time: 00:00 to 23:59
+12:00 to –12:00
0000 to 9999
ON/OFF
60 (min)
15 (min)
Inner tray
Inner tray
Copy mode
ON
OFF
Year: ‘00
Month: 01
Day: 01
Time: 00:00
00:00
2500 (For Copiers
with a copy speed of
25 copies per minute)
3500 (For Copiers
with a copy speed of
35 copies per minute)
4000 (For Copiers
with a copy speed of
40 copies per minute)
ON
6-17
6-17
6-18
6-18
6-19
6-19
6-20
6-20
6-21
6-21
6-22
Page
“Machine default”
settings
Content of machine default settings
Default settingsSetting range