Operation Manual
Table Of Contents
- Operation Guide
- CONTENTS
- MAKING FULL USE OF THE COPIER'S ADVANCED FUNCTIONS
- Section 1 IMPORTANT! PLEASE READ FIRST.
- Section 2 NAMES OF PARTS
- Section 3 PREPARATIONS
- Section 4 BASIC OPERATION
- Section 5 OTHER CONVENIENT FUNCTIONS
- 1. Making 2-sided copies from various types of originals [2-sided copy modes]
- 2. Copying two-page originals onto separate sheets [Page separation/Split copy modes]
- 3. Making a margin space on the copies [Margin mode]
- 4. Centering the copy image [Centering/Image shift mode]
- 5. Adding a space next to the copy images for making notes [Memo mode]
- 6. Making copies with clean edges [Border erase modes]
- 7. Fitting the image of either two or four originals onto a single copy page [Combine/Merge Copy modes]
- 8. Printing page numbers on copies [Print page numbers mode]
- 9. Overlaying one image over another [Form overlay mode]
- 10. Making booklets from sheet originals [Booklet/Stitching mode]
- 11. Making booklets from book originals [Book to Booklet mode]
- 12. Automatic sorting of copy sets without the Document Finisher [Sort/Finished mode]
- 13. Auto rotation function
- 14. Auto selection/Filing mode
- 15. Adding a front and/or back cover to your copy sets [Cover mode]
- 16. Original size selection mode
- 17. Feeding paper as a backing sheet for OHP transparencies [Transparency + backing sheet mode]
- 18. Inverting black and white [Invert mode]
- 19. Making mirror image copies [Mirror image mode]
- 20. Making a test copy prior to large volume copying [Proof mode]
- 21. Making more of the same copies after a copy job is finished [Repeat copy mode]
- 22. Copying a large volume of originals in one operation [Batch scanning mode]
- 23. Saving on toner use [Eco print mode]
- 24. Original set direction
- 25. Memorizing frequently used settings [Program function]
- 26. Registration keys
- 27. Easily add covers and insert sheets between various sets of originals in one operation [Job build mode]
- Section 6 DOCUMENT AND OUTPUT MANAGEMENT FUNCTIONS
- Section 7 COPIER MANAGEMENT FUNCTIONS
- Section 8 OPTIONAL EQUIPMENT
- Section 9 TROUBLESHOOTING
- Section 10 MAINTENANCE AND OPERATION INFORMATION
- Appendix: Functions and settings combination chart
- Laser Safety
- KYOCERA MITA EUROPE B.V.
Section 7 COPIER MANAGEMENT FUNCTIONS
7-22
(3) Making machine default settings
Perform the following procedure that corresponds to the desired
setting.
● Auto drawer[cassette] switching ON/OFF
Perform the following procedure to turn automatic drawer[cassette]
switching ON or OFF, as desired.
1
Display the “Machine default” screen.
(See “(2) Accessing the machine default settings” on
page 7-21.)
Inch specifications
Default setting
Default setting
Copy
default
Weekly
timer
Machine
default
Language
Management
End
BOX
Management
Bypass
setting
Document
Management
Print
report
Metric specifications
Default setting
Default setting
Copy
default
Machine
default
Language
Bypass
setting
Management
Week
timer
End
Hard Disk
Management
Document
Management
Print
report
2
Select “Auto drawer switching” [“Auto cassette switching”] in
the settings list on the left side of the touch panel and then
touch the “Change #” key.The “Auto drawer switching” [“Auto
cassette switching”] screen will be displayed.
Inch specifications
Default setting
Machine default
Auto drawer switching
Paper size(2nd drawer)
Paper size(3rd drawer)
Paper type(1st drawer)
Paper type(2nd drawer)
On / All types of paper
Auto / Inch
Auto / Inch
Plain
Plain
Default menu
Down
Change #
Close
Setting mode
Up
Default setting
Metric specifications
Default setting
Machine default
Auto cassette switching
Paper size (2nd cassette)
Paper size (3rd cassette)
Paper type (1st cassette)
Paper type (2nd cassette)
On / All types of paper
A4
A4
Plain
Plain
Up
Down
Change #
Close
Default setting
Default menu Setting mode
3
Touch the “On” key to automatic drawer[cassette] switching
ON.
Inch specifications
Auto drawer switching Back Close
When paper drawer is empty, switch to another one,
set same size/direction paper, and continue copying.
All types
of paper
Feed same
paper type
Default setting - Machine default
Function Paper type
Off
On
Metric specifications
Auto cassette switching
When paper cassette is empty, switch to another one,
set same size/direction paper, and continue copying.
Default setting - Machine default
Back
Close
Function
Paper type
All types
of Paper
Feed same
paper type
Off
On
4
In order to prevent a drawer[cassette] that holds a different
type of paper from being switched to when the automatic
drawer[cassette] switching function is turned ON, touch the
“Feed same paper type” key under “Paper type”.
NOTE
If you want to quit the displayed setting without changing it, touch the
“Back” key. The touch panel will return to the screen in step 2.
5
Touch the “Close” key. The touch panel will return to the
screen in step 2.
6
Touch the “Close” key once again. The touch panel will return
to the “Default setting” screen.
7
Touch the “End” key. The touch panel will return to the
contents of the “Basic” tab.