Operation Manual
Table Of Contents
- Operation Guide
- CONTENTS
- MAKING FULL USE OF THE COPIER'S ADVANCED FUNCTIONS
- Section 1 IMPORTANT! PLEASE READ FIRST.
- Section 2 NAMES OF PARTS
- Section 3 PREPARATIONS
- Section 4 BASIC OPERATION
- Section 5 OTHER CONVENIENT FUNCTIONS
- 1. Making 2-sided copies from various types of originals [2-sided copy modes]
- 2. Copying two-page originals onto separate sheets [Page separation/Split copy modes]
- 3. Making a margin space on the copies [Margin mode]
- 4. Centering the copy image [Centering/Image shift mode]
- 5. Adding a space next to the copy images for making notes [Memo mode]
- 6. Making copies with clean edges [Border erase modes]
- 7. Fitting the image of either two or four originals onto a single copy page [Combine/Merge Copy modes]
- 8. Printing page numbers on copies [Print page numbers mode]
- 9. Overlaying one image over another [Form overlay mode]
- 10. Making booklets from sheet originals [Booklet/Stitching mode]
- 11. Making booklets from book originals [Book to Booklet mode]
- 12. Automatic sorting of copy sets without the Document Finisher [Sort/Finished mode]
- 13. Auto rotation function
- 14. Auto selection/Filing mode
- 15. Adding a front and/or back cover to your copy sets [Cover mode]
- 16. Original size selection mode
- 17. Feeding paper as a backing sheet for OHP transparencies [Transparency + backing sheet mode]
- 18. Inverting black and white [Invert mode]
- 19. Making mirror image copies [Mirror image mode]
- 20. Making a test copy prior to large volume copying [Proof mode]
- 21. Making more of the same copies after a copy job is finished [Repeat copy mode]
- 22. Copying a large volume of originals in one operation [Batch scanning mode]
- 23. Saving on toner use [Eco print mode]
- 24. Original set direction
- 25. Memorizing frequently used settings [Program function]
- 26. Registration keys
- 27. Easily add covers and insert sheets between various sets of originals in one operation [Job build mode]
- Section 6 DOCUMENT AND OUTPUT MANAGEMENT FUNCTIONS
- Section 7 COPIER MANAGEMENT FUNCTIONS
- Section 8 OPTIONAL EQUIPMENT
- Section 9 TROUBLESHOOTING
- Section 10 MAINTENANCE AND OPERATION INFORMATION
- Appendix: Functions and settings combination chart
- Laser Safety
- KYOCERA MITA EUROPE B.V.
Section 7 COPIER MANAGEMENT FUNCTIONS
7-76
7. Report print out
Perform the following procedure to print out one of the following
reports.
< Copy report >
Lists all of the values for the copy default settings.
< Machine report >
Lists all of the values for the machine default settings.
< Counter report >
Lists the average toner density (black ratio) for each size of copy
paper used under each of the copy and printer functions of this
machine.
NOTE
Inch specification
• Make sure that 11" x 8 1/2" size paper is loaded in one of the
drawers[cassettes]. If 11" x 8 1/2" size paper is NOT loaded in one of
the drawers[cassettes], a screen requesting that you attempt to print
again will be displayed during the procedure. In this case, select
another paper size.
Metric specification
• Make sure A4 size paper is loaded in one of the drawers[cassettes].
If A4 size paper is NOT loaded in one of the drawers[cassettes], a
screen requesting that you attempt to print again will be displayed
during the procedure. In this case, select another paper size.
1
With the content of the “Basic” tab displayed, press the [ ]
key. The “Default setting” screen will be displayed.
2
Touch the “Print report” key.
Inch specifications
Default setting
Default setting
Copy
default
Weekly
timer
Machine
default
Language
Management
End
BOX
Management
Bypass
setting
Document
Management
Print
report
Metric specifications
Default setting
Default setting
Copy
default
Machine
default
Language
Bypass
setting
Management
Week
timer
End
Hard Disk
Management
Document
Management
Print
report
3
Use the keypad to enter the 4-digit management code.
The factory default setting for 63 cpm copiers is “6300” and
for 75 cpm copiers is “7500”.
Inch specifications
Enter the administrator number
Close
Metric specifications
Enter the administrator number
Close
NOTE
It is possible for you to change the 4-digit management code.
(See “Changing the management code” on page 7-34.)
4
Once the “Print report menu” screen is displayed, touch the
“Copy report” key, the “Machine report” key or the “Counter
report” key, as appropriate.
Inch specifications
Print report
Print report menu
Copy
report
Counter
report
Machine
report
Default setting
Close
Metric specifications
Print report
Print report menu
Copy
report
Machine
report
Counter
report
Default setting
Close