Operation Manual
Table Of Contents
- Operation Guide
- CONTENTS
- MAKING FULL USE OF THE COPIER'S ADVANCED FUNCTIONS
- Section 1 IMPORTANT! PLEASE READ FIRST.
- Section 2 NAMES OF PARTS
- Section 3 PREPARATIONS
- Section 4 BASIC OPERATION
- Section 5 OTHER CONVENIENT FUNCTIONS
- 1. Making 2-sided copies from various types of originals [2-sided copy modes]
- 2. Copying two-page originals onto separate sheets [Page separation/Split copy modes]
- 3. Making a margin space on the copies [Margin mode]
- 4. Centering the copy image [Centering/Image shift mode]
- 5. Adding a space next to the copy images for making notes [Memo mode]
- 6. Making copies with clean edges [Border erase modes]
- 7. Fitting the image of either two or four originals onto a single copy page [Combine/Merge Copy modes]
- 8. Printing page numbers on copies [Print page numbers mode]
- 9. Overlaying one image over another [Form overlay mode]
- 10. Making booklets from sheet originals [Booklet/Stitching mode]
- 11. Making booklets from book originals [Book to Booklet mode]
- 12. Automatic sorting of copy sets without the Document Finisher [Sort/Finished mode]
- 13. Auto rotation function
- 14. Auto selection/Filing mode
- 15. Adding a front and/or back cover to your copy sets [Cover mode]
- 16. Original size selection mode
- 17. Feeding paper as a backing sheet for OHP transparencies [Transparency + backing sheet mode]
- 18. Inverting black and white [Invert mode]
- 19. Making mirror image copies [Mirror image mode]
- 20. Making a test copy prior to large volume copying [Proof mode]
- 21. Making more of the same copies after a copy job is finished [Repeat copy mode]
- 22. Copying a large volume of originals in one operation [Batch scanning mode]
- 23. Saving on toner use [Eco print mode]
- 24. Original set direction
- 25. Memorizing frequently used settings [Program function]
- 26. Registration keys
- 27. Easily add covers and insert sheets between various sets of originals in one operation [Job build mode]
- Section 6 DOCUMENT AND OUTPUT MANAGEMENT FUNCTIONS
- Section 7 COPIER MANAGEMENT FUNCTIONS
- Section 8 OPTIONAL EQUIPMENT
- Section 9 TROUBLESHOOTING
- Section 10 MAINTENANCE AND OPERATION INFORMATION
- Appendix: Functions and settings combination chart
- Laser Safety
- KYOCERA MITA EUROPE B.V.
Section 9 TROUBLESHOOTING
9-12
• Misfeed in the optional Side Feeder
If the message below is displayed, a misfeed has occurred in the
optional Side Feeder. Perform the following procedure to remove the
jammed paper.
Inch specification
Paper misfeed.
1.Remove paper from between Copier and
Side Paper Deck.
2.Reset Side Paper Deck to Mainframe.
JAM 00
Metric specification
Paper misfeed.
1.Remove paper from between copier and
side feeder.
2.Reset side feeder to mainframe.
JAM 00
1
Disconnect the Side Feeder from the main body of the
copier.
2
If there is any jammed paper inside the coupling area
between the Side Feeder and the copier, remove it.
3
Reconnect the Side Feeder to the copier.
If there is any jammed paper inside the Side Feeder, go to
the next step.
4
Open the upper cover to the Side Feeder.
5
Remove the jammed paper.
6
Close the upper cover to the Side Feeder.