Operation Manual
Table Of Contents
- Operation Guide
- CONTENTS
- MAKING FULL USE OF THE COPIER'S ADVANCED FUNCTIONS
- Section 1 IMPORTANT! PLEASE READ FIRST.
- Section 2 NAMES OF PARTS
- Section 3 PREPARATIONS
- Section 4 BASIC OPERATION
- Section 5 OTHER CONVENIENT FUNCTIONS
- 1. Making 2-sided copies from various types of originals [2-sided copy modes]
- 2. Copying two-page originals onto separate sheets [Page separation/Split copy modes]
- 3. Making a margin space on the copies [Margin mode]
- 4. Centering the copy image [Centering/Image shift mode]
- 5. Adding a space next to the copy images for making notes [Memo mode]
- 6. Making copies with clean edges [Border erase modes]
- 7. Fitting the image of either two or four originals onto a single copy page [Combine/Merge Copy modes]
- 8. Printing page numbers on copies [Print page numbers mode]
- 9. Overlaying one image over another [Form overlay mode]
- 10. Making booklets from sheet originals [Booklet/Stitching mode]
- 11. Making booklets from book originals [Book to Booklet mode]
- 12. Automatic sorting of copy sets without the Document Finisher [Sort/Finished mode]
- 13. Auto rotation function
- 14. Auto selection/Filing mode
- 15. Adding a front and/or back cover to your copy sets [Cover mode]
- 16. Original size selection mode
- 17. Feeding paper as a backing sheet for OHP transparencies [Transparency + backing sheet mode]
- 18. Inverting black and white [Invert mode]
- 19. Making mirror image copies [Mirror image mode]
- 20. Making a test copy prior to large volume copying [Proof mode]
- 21. Making more of the same copies after a copy job is finished [Repeat copy mode]
- 22. Copying a large volume of originals in one operation [Batch scanning mode]
- 23. Saving on toner use [Eco print mode]
- 24. Original set direction
- 25. Memorizing frequently used settings [Program function]
- 26. Registration keys
- 27. Easily add covers and insert sheets between various sets of originals in one operation [Job build mode]
- Section 6 DOCUMENT AND OUTPUT MANAGEMENT FUNCTIONS
- Section 7 COPIER MANAGEMENT FUNCTIONS
- Section 8 OPTIONAL EQUIPMENT
- Section 9 TROUBLESHOOTING
- Section 10 MAINTENANCE AND OPERATION INFORMATION
- Appendix: Functions and settings combination chart
- Laser Safety
- KYOCERA MITA EUROPE B.V.
Section 5 OTHER CONVENIENT FUNCTIONS
5-7
4
Touch the “Margin” key. The screen to set the front side
margin will be displayed.
Inch specifications
Margin/Centering
Reposition image to left/right or
top/bottom, and also center image
on paper.
None
Margin
Centering
Ready to copy.
Register Back Close
11x8
1
/
2
"
Set
Paper size
Metric specifications
None
Back Close
Ready to copy.
Register
Set
Paper size
Margin/Image shift
Reposition image to left/right or
top/bottom and center image on paper.
Margin
Image
shift
5
Use the up/down and left/right cursor keys to select the
desired location and width of each margin.
Inch specifications
Centering
Front page
Back page
margin
Auto
None
Margin
Margin/Centering
Ready to copy.
Register Back Close
11x8
1
/
2
"
Set
Paper size
Rear
Check direction
Left top
corner
Check direction of
original top side.
Left
1
/
4
"
0
"
(0~
3
/
4
)
(0~
3
/
4
)
Metric specifications
Back Close
Ready to copy.
Register
Set
Paper size
Back Edge
Left top
corner
None
Margin
Image
shift
Margin/Image shift
Check direction
Check direction of
original.
Front page
Left
Back page
margin
Auto
6
If you are making 2-sided copies, touch the “Back page
margin” key. The “Back page margin” screen will be
displayed.
Inch specifications
To p
Centering
Front page
Back page
margin
Auto
None
Margin
Margin/Centering
Ready to copy.
Register Back Close
11x8
1
/2"
Set
Paper size
Rear
Check direction
Left top
corner
Check direction of
original top side.
Left
1
/2
"
1
/4
"
(0~
3
/4)
(0~
3
/4)
Metric specifications
Back Close
Ready to copy.
Register
Set
Paper size
Back Edge
Left top
corner
Margin/Image shift
None
Margin
Image
shift
Front page
Left
To p
Back page
margin
Check direction
Check direction of
original.
Auto
7
If you want to create a margin on the back side of the copies
that lines up with that on the front side, touch the “Auto” key.
If you want to set the margins for the front and back sides
separately, touch the “Front/Back margin” key. The screen to
set the back side margin will be displayed.
Inch specifications
Back page margin
Auto
Front/Back
margin
If "AUTO" is selected for duplex
copying, rear will have same margin
setting as that for the front page.
Ready to copy.
Back Close
11x8
1
/
2
"
Set
Paper size
Rear
Check direction
Left top
corner
Check direction of
original top side.
Metric specifications
Back page margin
Auto
Front/Back
margin
If "AUTO" is selected at the duplex
copying, back side will have same margin
setting as that for the front page.
Back Close
Ready to copy.
Set
Paper size
Back Edge
Left top
corner
Check direction
Check direction of
original.
8
Use the up/down and left/right cursor keys to select the
desired location and width of each margin.
Inch specifications
Back page margin
Auto
Front/Back
margin
Back page
Ready to copy.
Back Close
11x8
1
/2"
Set
Paper size
Rear
Check direction
Left top
corner
Check direction of
original top side.
(0~
3
/4)
"
"
(0~
3
/4)
0
0
Metric specifications
Back page margin
Auto
Front/Back
margin
Back page
Back Close
Ready to copy.
Set
Paper size
Back Edge
Left top
corner
Check direction
Check direction of
original.
9
Follow the instructions on the right side of the touch panel
and verify the direction in which the originals were set.
IMPORTANT!
If the designation for the direction that the originals are set is not
correct, copying may be accomplished incorrectly.
10
Press the [Start] key.
Copying will start.