Operation Manual
Table Of Contents
- Operation Guide
- CONTENTS
- MAKING FULL USE OF THE COPIER'S ADVANCED FUNCTIONS
- Section 1 IMPORTANT! PLEASE READ FIRST.
- Section 2 NAMES OF PARTS
- Section 3 PREPARATIONS
- Section 4 BASIC OPERATION
- Section 5 OTHER CONVENIENT FUNCTIONS
- 1. Making 2-sided copies from various types of originals [2-sided copy modes]
- 2. Copying two-page originals onto separate sheets [Page separation/Split copy modes]
- 3. Making a margin space on the copies [Margin mode]
- 4. Centering the copy image [Centering/Image shift mode]
- 5. Adding a space next to the copy images for making notes [Memo mode]
- 6. Making copies with clean edges [Border erase modes]
- 7. Fitting the image of either two or four originals onto a single copy page [Combine/Merge Copy modes]
- 8. Printing page numbers on copies [Print page numbers mode]
- 9. Overlaying one image over another [Form overlay mode]
- 10. Making booklets from sheet originals [Booklet/Stitching mode]
- 11. Making booklets from book originals [Book to Booklet mode]
- 12. Automatic sorting of copy sets without the Document Finisher [Sort/Finished mode]
- 13. Auto rotation function
- 14. Auto selection/Filing mode
- 15. Adding a front and/or back cover to your copy sets [Cover mode]
- 16. Original size selection mode
- 17. Feeding paper as a backing sheet for OHP transparencies [Transparency + backing sheet mode]
- 18. Inverting black and white [Invert mode]
- 19. Making mirror image copies [Mirror image mode]
- 20. Making a test copy prior to large volume copying [Proof mode]
- 21. Making more of the same copies after a copy job is finished [Repeat copy mode]
- 22. Copying a large volume of originals in one operation [Batch scanning mode]
- 23. Saving on toner use [Eco print mode]
- 24. Original set direction
- 25. Memorizing frequently used settings [Program function]
- 26. Registration keys
- 27. Easily add covers and insert sheets between various sets of originals in one operation [Job build mode]
- Section 6 DOCUMENT AND OUTPUT MANAGEMENT FUNCTIONS
- Section 7 COPIER MANAGEMENT FUNCTIONS
- Section 8 OPTIONAL EQUIPMENT
- Section 9 TROUBLESHOOTING
- Section 10 MAINTENANCE AND OPERATION INFORMATION
- Appendix: Functions and settings combination chart
- Laser Safety
- KYOCERA MITA EUROPE B.V.
Section 5 OTHER CONVENIENT FUNCTIONS
7
If the optional Document Finisher is installed on your copier,
the “Saddle Stitch” [“Center Staple”] key will be displayed
and you will be able to select center stapling.
If the optional Center-Folding Unit is installed as well, you will
be able to center fold those stapled sets.
In this case, if you DO want the center stapling operation, or
the center stapling and folding operation, to be performed,
touch the “Saddle Stitch” [“Center Staple”] key and go to the
next step.
If you do NOT want either operation to be performed, go
directly to step 9.
Inch specifications
Booklet
2 sided mode.
Book
➔Booklet
Stitching
Off
Stitching
Front cvr
Saddle
Stitch
None
Booklet
1-sided
2-sided
Left/Right
2-sided
Top/Bottom
Open from
left
Open from
right
Open from
top
Register
Set
Paper size
Back Close
11x8
1
/2"
Original Finishing
Rear
Check direction
Left top
corner
Check direction of
original top side.
Metric specifications
Duplex Mode.
Stitching
Off
Stitching
Front cov.
Center
Staple
Back Edge
Left top
corner
Check direction
Check direction of
original.
1-sided
2-sided
Left/Right
2-sided
Top/Bottom
To p
binding
Set
Paper size
Booklet
Book
RBooklet
None
Back Close
Register
Booklet
Left
binding
Right
binding
Original Finished
8
Touch the “Saddle stitch” key or the “Bind & Fold” key, as
appropriate.
* It is possible for you to center staple, or center staple and
fold, up to 16 copy sheets (64 layout pages) at one time.
Inch specifications
Pape Set
100%
Saddle Stitch
Back Close
Off
Saddle
stitch
Bind &
Fold
8
1
/2x11"
Set first page.
Press "Start" key.
Metric specifications
Duplex Mode.
Saddle Stitch
Saddle
Stitch
Bind
& Fold
Back Close
Set
Paper size
Off
NOTE
The “Bind & Fold” key will only be displayed when the optional
Center-Folding Unit is installed on your copier.
9
If you want to add covers, touch the “Stitching Front cvr”
[“Stitching Front cov.”] key and go to the next step.
If you do NOT want to add covers, go directly to step 11.
Inch specifications
Booklet
2 sided mode.
Book
➔Booklet
Stitching
Off
Stitching
Front cvr
Saddle
Stitch
None
Booklet
1-sided
2-sided
Left/Right
2-sided
Top/Bottom
Open from
left
Open from
right
Open from
top
Register
Set
Paper size
Back Close
11x8
1
/
2
"
Original Finishing
Rear
Check direction
Left top
corner
Check direction of
original top side.
Metric specifications
Duplex Mode.
Stitching
Off
Stitching
Front cov.
Center
Staple
Back Edge
Left top
corner
Check direction
Check direction of
original.
1-sided
2-sided
Left/Right
2-sided
Top/Bottom
To p
binding
Set
Paper size
Booklet
Book
RBooklet
None
Back Close
Register
Booklet
Left
binding
Right
binding
Original Finished
10
Touch the “Cover” key and select whether or not (and where)
to copy on each of the front and back covers.
Inch specifications
Front cover Rear cover
2 sided mode.
No cover
Cover
Blank
Front copy
2 sided
copy
Back copy
Blank
Front copy
2 sided
copy
Back copy
Front cover
Set
Paper size
Back Close
11x8
1
/2"
Metric specifications
Back
Front cover
Back cover
Close
Stitching Front cover.
Duplex Mode.
No cover
Cover
Blank
Front copy
2-sided
copy
Back copy
Front copy
2-sided
copy
Back copy
Blank
Set
Paper size
5-23-1