User's Manual

Table of Contents/Important Points
GB 27
Draining water after wetting the
product
If the product has gotten wet, there are
some non-waterproof areas. If you use
the product in this state, water remaining
in those parts might dampen your clothes
or bag, or the sound might become hard
to hear.
• Follow these steps to drain the water.
1 Thoroughly wipe away water
from the surface of the product
with a clean, dry cloth that
doesn’t shed fibres.
2 Grasp the product firmly, and
shake it in the direction of the
arrows until water no longer
comes out (Noise cancelling
microphone side: at least 20
times each direction, Speaker/
microphone side: at least 20
times each direction)
• When shaking the product, stay
alert to your surroundings.
• Be careful that the product does not
slip from your hand, but hold it
firmly to drain water.
3 Wipe off the water that came
out, and place the product on
top of a clean, dry towel or cloth
at room temperature.
• The microphone, the speaker, and
the noise cancelling microphone
are particularly hard to drain. Place
those parts face down and press
each area to wipe them.