Installation guide

8
8-93
Default Setting (System Menu)
1 In the Sys. Menu/Count. menu, press the  or  key to
select [Printer].
2 Press the OK key. The Printer menu appears.
3 Press the  or  key to select [LF Action].
4 Press the OK key. LF Action appears.
5 Press the  or  key to select [LF Only], [LF and CR] or
[Ignore LF].
6 Press the OK key. Completed. is displayed and the
screen returns to the Printer menu.
CR Action
Set the character return action when the machine receives the character return code (character code 0DH). The table
below shows the available settings. The default setting is
CR Only .
Use the procedure below to specify a CR action.
1 In the Sys. Menu/Count. menu, press the  or  key to
select [Printer].
Sys. Menu/Count.: a b
5 Common Settings
6 Copy
*********************
[ Exit ]
7 Printer
Printer: a b
*********************
2 EcoPrint
3 Override A4/LTR
[ Exit ]
1 Emulation Set.
LF Action: a b
*********************
2 LF and CR
3 Ignore LF
1 *LF Only
Item Description
CR Only Only character return performed.
LF and CR Character return and line feed performed.
Ignore CR No character return performed.
Sys. Menu/Count.: a b
5 Common Settings
6 Copy
*********************
[ Exit ]
7 Printer