Manualshelf

Installation guide

ManualsBrandsKYOCERA ManualsPrint & ScanM2535dn
371372373374375376377378379380
Table Of Contents
8-166
Default Setting (System Menu)
TCP/IP
This specified whether TCP/IP is used.
The method for setting is the same as for the standard Network settings. For details, refer to
TCP/IP (IPv4) Setup on
page 8-137.
IPv4 Setting
This selects the settings for TCP/IP (IPv4). The method for setting is the same as for the standard Network settings.
For details, refer to
TCP/IP (IPv4) Setup on page 8-137.
IPv6 Setting
This selects the settings for TCP/IP (IPv6). The method for setting is the same as for the standard Network settings.
For details, refer to
TCP/IP (IPv6) Setup on page 8-146.
Bonjour Settings
Select whether or not to use Bonjour. The default setting is
Off
.
Use the procedure below to specify the Bonjour setting.
1
In the Sys. Menu/Count. menu, press the
or
key to
select [System/Network], and press the
OK
key.
A login screen will appear. Then, enter the user ID and
password with administrator privileges to log in, and
press [Login] (the
Right Select
key).
2
The System/Network menu appears.
3
Press the
or
key to select [Optional Network].
4
Press the
OK
key. The Optional Network screen
appears.
Sys. Menu/Count.:
a
b
1
Report
2
Counter
*********************
[ Exit ]
3
System/Network
Login User Name:
L
b
*******************
Login Password:
[ Login ]
System/Network:
a
b
*********************
2
I/F Block Set.
3
Security Level
[ Exit ]
1
Network Setting
Optional Network:
a
b
1
Basic
[ Exit ]