User manual

Glossary
E-2
Cassette mode
This is an operation mode for the MP tray. When
this mode is used, approximately 50 sheets of
plain paper can be fed continuously, the same as
for the cassette.
dpi (dots per inch)
This indicates the number of dots printed per
inch, and is the unit of printer resolution.
Ecoprint
This is a printing mode that controls toner
consumption. Pages printed in the Ecoprint mode
are lighter than pages printed in the normal
mode. The default setting is Off.
Emulation
This refers to emulation of manufacturers'
printers. The
FS-1000
emulates operation of the
following printers: PCL, Line printer, IBM
Proprinter, DIABLO 630, EPSON LQ-850,
KPDL2 (option).
Expansion memory
This option is used to increase printer memory.
The
FS-1000
has one expansion slot, and you can
install a 16 MB, 32 MB, 64 MB, or 128 MB
DIMM (Dual Inline Memory Module). See your
Kyocera dealer to purchase the DIMM that is
best suited for use with this printer.
Face-up tray
This is located at the rear of the printer. Select
paper output to the face-up tray when printing
on postcards, envelopes, or labels.
First mode
This is an operation mode for the MP tray.
Because the MP tray default setting is set to first
mode (priority printing from the MP tray), if
there is paper inserted in the MP tray, the first
paper will always feed from there even if another
paper source is selected. First mode is specified
as the factory default, but you can change this
setting from the
Remote Operation Panel
.
IEEE1284
This is a standard used when connecting a
printer to a computer, and was established by the
Institute of Electrical and Electronic Engineers
in 1994.
KIR (Kyocera Image Refinement)
This is Kyocera's original smoothing function. It
uses software to enhance the printer's resolution
and produce high-quality printing. The default
setting is Off.
KPDL2
(Kyocera Printer Description
Language 2)
This is Kyocera's version of Adobe PostScript 2.
To use this, the
KPDL2 Upgrade Kit
(
PK-6
) must
be installed on your printer.
Kyocera Digital Library
This is contained on the CD-ROM supplied with
the printer. The contents of the CD-ROM include
manuals, printer drivers, and various utilities.
Kyocera PrintMonitor
This is a network management tool that can be
used with the Kyocera FS series. You can view
information for printers connected to the
network using SNMP commands.
Kyocera
PrintMonitor
is contained on the
Kyocera Digital
Library
CD-ROM supplied with the printer.