User manual

Operator Panel
1-5
1 — Software Version
This information shows the software (firmware) version and date of issue
of the printer.
2 — Hardware Information
This information shows the currently selected paper source (indicated by
an asterisk), paper size, and various other printer settings.
3 — Page Information
This information shows the currently selected resolution, number of copies
printed to date, and the total page count.
4 — Memory
This information shows the amount of total memory installed in the
printer, the amount of currently available memory, and the current status
of the RAM disk (see page
1-35
).
5 — Installation Options
This shows the option(s) currently installed in the printer.
6 — Emulation
This shows all available emulations and the currently selected emulation
(marked with an asterisk). The printer is shipped from the factory with
PCL 6 emulation selected.
7 — Error Log
This displays the last three instances of the following four types of errors,
listing them in the order of their occurrence:
KPDL Error Press GO
;
Memory overflow Press GO
;
Print overrun Press GO
;
RAM DISK
err Press GO
. The most recent error is displayed on the top line of the
Error Log. For error remedies, see section
4.3.3
. Error information is
cleared when the printer's power is turned off.
8 — Interface Information
This information shows all interfaces installed in the printer and the
currently selected interface (marked with an asterisk).
The Font section shows the font that is automatically selected when the
printer starts up (default font). It is possible to set different default fonts
for each interface.
9 — KIR Test Pattern
This shows the KIR test pattern. You can confirm whether KIR is on or off.