Operation Manual

5-12
Operation on the Machine > Application
2
Install the application.
1 Press [Add].
2 Insert the removable memory containing the application to be installed into the USB Port (A1).
3 Select the application to be installed and press [Install].
You can view detailed information on the selected application by pressing [Detail].
4 Press [Yes] in the confirmation screen.
Installation of the application begins. Depending on the application being installed, the installation
may take some time.
Once the installation ends, the original screen reappears.
Activating/Deactivating Application
The procedure is as follows.
1
Display the screen.
1 Press the [ System Menu ] key.
2 Press [ ] and then [Application].
NOTE
When the message "Removable Memory was recognized. Displaying files. Are you sure?"
is displayed, press [No].
NOTE
To install another application, repeat steps 2-3 and 2-4.
To remove the removable memory, press [Remove Memory] and wait until the message
"Removable Memory can be safely removed." appears. Then remove the removable
memory.
NOTE
If the user authentication screen appears, enter your login user name and login password
and press [Login]. For this, you need to login with administrator privileges. The factory
default login user name and login password are set as shown below.
Model Name Login User Name Login Password
TASKalfa 3051ci 3000 3000
TASKalfa 3551ci 3500 3500
TASKalfa 4551ci 4500 4500
TASKalfa 5551ci 5500 5500