Operation Manual

5-39
Operation on the Machine > Sending
WSD Scan/DSM Scan
WSD Scan
WSD Scan saves images of originals scanned on this machine as files on a WSD-compatible computer.
Installing Driver Software (for Windows 7)
1
Click the [Start] button on the Windows, and then click
[Network].
In Windows 8, select the Desktop in the Start screen and click [ Libraries ], and then
[
Network ].
2
Install the driver.
Right-click the machine's icon (Kyocera:TASKalfaXXX:XXX) and then click [ Install ].
During the installation, double-click the icon shown on the task bar to display the "
Driver
Software Installation
" screen. When " Your devices are ready to use " is displayed on the
[
Driver Software Installation ] screen, the installation is completed.
NOTE
To use WSD Scan, confirm that the computer used for WSD scanning and the machine is network-connected, and
WSD Scan on page 8-45
is set to [On] in the network settings.
For information on operating the computer, refer to the computer's help or the operation guide of your software.
NOTE
When [ Network ] does not appear in the Start menu, perform the following procedure.
1 Right-click [ Start ] and click [ Property ] in the menu that appears.
2 Select the [ [Start] menu ] tab in the " Task bar and [Start] menu properties " screen, and
click [
Customize ].
3 When the " Customize [Start] menu " screen appears, select the " Network " check box
and click [
OK ].
NOTE
If the " User Account Control " window appears, click [ Continue ].
If the "
Found New Hardware " window appears, click [ Cancel ].