Operation Manual

7-18
Status/Job Cancel > Device/Communication
"FAX Port 1", "FAX Port 2"
• The information such as sending/receiving and dialing is displayed.
• Press [Line Off] to cancel a fax in sending/receiving. For details, refer to Canceling FAX
Communication on page 7-19.
• Press [Manual RX] to start receiving fax. Use this function when you want to talk to the
sender before receiving the fax originals. For details, refer to the
FAX Operation Guide .
• Press [Log] to display the fax transmission history. For details, refer to the
FAX Operation
Guide
.
"i-FAX"
When [Check New FAX] is pressed, the machine connects to the mail server and starts
reception of any new i-faxes.
Removing the USB Memory
Follow the steps below to remove USB memory safely.
1
Display the screen.
Press the [ Status/Job Cancel ] key.
2
Press the [Device/Communicate] tab.
3
Press [Remove] in "Removable Memory".
When "Removable memory can be safely removed." is displayed, remove the USB memory.
Ready.
Scanner
Ready.
Printer
2GB/16GB
Removable Memory
Hard Disk
Format Remove
Line Off Manual RX
FAX Port 1
LogFAX
Check New FAX
i-FAX
FAX Port 2
Line Off
Status
Receiving... Receiving...
Overwriting...
Close
Paper/
Supplies
Storing JobsSending JobsPrinting Jobs
Device/
Communicate
2
1