Operation Manual

8-22
Setup and Registration (System Menu) > System Menu
Sending Jobs Configure stamp settings for sending documents.
After configuring the setting, return to the Sending Functions or Custom Box (Sending
Documents) screen from System Menu, and press the [ Reset ] key.
Text Stamp Select whether to print a text stamp on all sending jobs.
Value: Off, On
NOTE
When [On] is selected, the Text Stamp settings cannot be changed when sending.
Edit Text Stamp Set the default text stamp.
Stamp Select a text string to be stamped from templates, or press [Stamp] and enter a maximum of 32
characters for the text string.
NOTE
Templates that have been set will appear. For details on registering templates, refer to Tex t
(Text Stamp) on page 8-20.
Position Set the text stamp position.
Value: Top Left, Top Middle, Top Right, Middle Left, Center, Middle Right, Bottom Left,
Bottom Middle, Bottom Right, Detail
NOTE
Press [Detail] to set the stamp position using numeric values, and to set the stamp angle.
Font Set the font of the text stamp.
Value
Size: Font sizes registered in Font (Text Stamp) on page 8-20
are displayed.
Character Border: Off, Circle, Rectangle, Underline
Style: None, Bold, Italic, Bold/Italic
Font: Courier, Letter Gothic
Color: Black, Red, Green, Blue, Cyan, Magenta, Yellow, White
Density: 10 to 100% (in 10% increments)
Display Pattern: Transparent, Clipping, Overwrite
Bates Stamp Select whether to print a bates stamp on all sending jobs.
Value: Off, On
NOTE
When [On] is selected, the Bates Stamp settings cannot be changed when sending.
Edit Bates Stamp Set the default Bates Stamp.
Value: Date, User Name, Serial Number, Numbering, Text 1, Text 2, Date Format,
Numbering Default, Position, Font
NOTE
To set [Text 1] or [Text 2], press [Change] below and enter a maximum of 32 characters for the
text string.
To set [Date], press [Date Format] and set the date display format.
To set [Numbering], press [Numbering Default] and set the starting sequence number
(1 to 9999999).
When you press [Detail] in "Position", the stamp position can be specified using numeric
values.
Item Description