Operation Manual

8-48
Setup and Registration (System Menu) > System Menu
Wireless Network
*1 Not displayed if you selected [Ad Hoc] for "Connection Mode".
*2 Not displayed if you selected [WPA2-PSK] for "Network Authentication".
NOTE
This function is displayed when the optional Wireless Interface Kit is installed.
Item Description
Connection Status When the optional Wireless Interface Kit is installed, you can check the wireless LAN status.
Quick Setup Wizard If the machine will connect to an access point that supports the automatic wireless network setup,
connection settings can be configured by Quick Setup.
Available Network Displays access points to which the machine can connect.
Push Button Method If the access point supports the push button method, wireless settings can be configured using
the push button. This setting executes push button, and the connection is started by pressing
the push button on the access point.
PIN Code
Method(Device)
Starts connection using the machine's PIN code. Enter the PIN code into the access point. The
PIN code of the machine is automatically generated.
PIN Code
Method(Terminal)
Starts connection using the PIN code of the access point. Enter the PIN code of the access
point.
Custom Setup The detailed settings for wireless LAN can be changed.
Network Name(SSID) Set the SSID (Service Set Identifier) of the wireless LAN to which the machine connects.
NOTE
Up to 32 characters can be entered.
Connection Mode Set the connection mode.
Value: Ad Hoc, Infrastructure
NOTE
Ad Hoc: Directly communicates with the device without going through an access point. This
method cannot be used to connect to two or more devices.
Infrastructure: Performs communication through an access point.
Channel Set channel.
Use [-] / [+] or the numeric keys to enter a number.
Value: 1 to 11
Network Authentication Select network authentication type.
To select other options, open the device home page from a computer.
Value: Open, Shared, WPA-PSK
*1
, WPA2-PSK
*1
Encryption Select encryption method and enter the Preshared key. The setting values vary depending on the
Network Authentication setting.
When Network Authentication is set to [ Open ] or [ Shared ]
Value: Disable, WEP
When Network Authentication is set to [
PA-PSK ] or [ PA-PSK ]
Value: TKIP
*2
, AES, Auto
*2
, Preshared Key
NOTE
If [WEP] is selected, enter the WEP key. Up to 26 characters can be entered.
If [Preshared Key] is selected, enter the Preshared key. Enter the value in 8 to 64 characters.