Operation Manual

9-22
User Authentication and Accounting (User Login, Job Accounting) > User Login
1
Display the screen.
1 Referring to User Login Setting on page 9-2, display the user login setting screen.
2 Press [Change] of "Obtain Network User Property".
2
Configure the settings.
1 Press [On].
2 Press [Server Name].
3 Enter the LDAP server name or the IP address and press [OK].
4 Press [# Keys] to enter the LDAP port number using the numeric keys.
5 Press [Name 1].
6 Enter the LDAP Attribute to obtain the user name to be displayed and press [OK].
7 Similar to steps 5 and 6, set [Name 2].
8 Press [E-mail Address].
9 Enter the LDAP Attribute to obtain the E-mail address and press [OK].
10 If you set the server type to "Kerberos", press [Authentication Type] and set the
authentication method.
11 Press [Search Timeout] to set the amount of time to wait before time-out.
12 Press [+], [-] or the numeric keys to enter the time and press [OK].
13 Press [LDAP Security] to select the type of encryption according to the type of security
employed by the LDAP server.
14 Select [Off], [SSL/TLS], or [STARTTLS] and press [OK].
User Login/Job Accounting - Obtain NW User Property
Get the network user information.
㪦㫅
㪦㪽㪽
Cancel OK
Server Name
Search
Timeout
LDAP
Security
LDAP Server Information:
E-mail Address
Port:
Name 2
Name 1
Acquisition of User Information:
# Keys
displayName
mail
192.181.11.11
389
30
Off
sec.
Authenticat
Type
Simple