Operation Manual

2-23
Installing and Setting up the Machine > Default Settings of the Machine
Default Settings of the Machine
The default settings of the machine can be changed in System Menu. Before using this machine, configure such settings
as date and time, network configuration, and energy saving functions as needed.
Setting Date and Time
Follow the steps below to set the local date and time at the place of installation.
When you send an E-mail using the transmission function, the date and time as set here will be printed in the header of
the E-mail message. Set the date, time and time difference from GMT of the region where the machine is used.
1
Display the screen.
Press the [ System Menu ] key and select [Date/Timer/Energy Saver].
NOTE
For settings that are configurable from System Menu, refer to Setup and Registration (System Menu) (page 8-1).
NOTE
If user login administration is enabled, you can only change the settings by logging in with administrator privileges.
If user login administration is disabled, the user authentication screen appears. Enter a login user name and
password, and press [Login].
The factory default login user name and login password are set as shown below.
Be sure to set the time difference before setting the date and time.
If you change the date/time while using the trial version of an application, you will no longer be able to use the
application.
Application (page 5-11)
Optional Applications (page 11-9)
Model Name Login User Name Login Password
TASKalfa 3051ci 3000 3000
TASKalfa 3551ci 3500 3500
TASKalfa 4551ci 4500 4500
TASKalfa 5551ci 5500 5500
1
System Menu
Edit Destination
Close
User Property
Adjustment/Maintenance
Application
User Login/Job Accounting
Date/Timer/Energy Saver
Internet
2/2
3
Press [ ] or [ ] to scroll up and down.
2