Operation Manual
2-33
Installing and Setting up the Machine > Command Center RX
Command Center RX
If the machine is connected to the network, you can configure various settings using Command Center RX.
The settings that are configurable with Command Center RX are as follows.
Some configurable settings are restricted according to the access rights of the logged-in user.
* Displayed only when the optional fax kit is installed.
This section explains how to access Command Center RX and change security settings and host name. For details on
Command Center RX, refer to the
Command Center RX User Guide
.
Setting Description
Administ-
rator
User
Device Information
The machine's structure can be checked.
[
Configuration
], [
Counter
], [
About Command Center RX
]
❍❍
Job Status
Displays all device information, including print and scan jobs, storing jobs,
scheduled jobs, and job log history.
[
Printing Jobs Status
], [
Printing Job Log
], [
Sending Job Status
],
[
Scheduled Jobs
], [
Sending Job Log
], [
Storing Job Status
],
[
Storing Job Log
]
❍❍
Document Box
Add or delete document boxes, or delete documents within a document box.
[
Custom Box
], [
FAX Box
]*, [
Polling Box
]*, [
Job Box Settings
]
❍❍
Address Book
Create, edit, or delete addresses and address groups.
[
Machine Address Book
], [
External Address Book Settings
],
[
One Touch Key
]
❍❍
Device Settings
Configure the advanced settings of the machine.
[
Paper/Feed/Output
], [
Original Settings
], [
Energy Saver/Timer
], [
Date/
Time
], [
System
]
❍
-
Function Settings
Configure the advanced function settings.
[
Common/Job Defaults
], [
Copy
], [
Printer
], [
E-mail
], [
Scan to Folder
],
[
DSM Scan
], [
FAX / i-FAX
]*, [
Send and Forward
]*, [
RX/Forward Rules
],
[
Operation Panel
]
❍
-
Network Settings
Configure the network advanced settings.
[
General
], [
TCP/IP
], [
Protocol
]
❍
-
Security Settings
Configure the security advanced settings.
[
Device Security
], [
Send Security
], [
Network Security
], [
Certificates
]
❍
-
Management
Settings
Configure the advanced management settings.
[
Job Accounting
], [
Authentication
], [
ID Card
], [
Notification/Report
],
[
History Settings
], [
SNMP
], [
System Stamp
], [
Message Board
], [
Reset
]
❍
-
NOTE
The optional Fax Kit is required in order to make use of fax functionality.
Here, information on the FAX settings has been omitted. For more information on using the FAX, refer to the
FAX
Operation Guide
.
To fully access the features of the Command Center RX pages, enter the User Name and Password and click Login.
Entering the predefined administrator password allows the user to access all pages, including Document Box,
Address Book, and Settings on the navigation menu. The factory default setting for the default user with administrator
privileges is shown below.
* Upper case and lower case letters are distinguished (case sensitive).
Login User Name Admin
Login Password Admin