Operation Manual

2-36
Installing and Setting up the Machine > Command Center RX
Changing Host Name
Change the host name of the machine.
1
Display the screen.
1 Access Command Center RX by referring to Accessing Command Center RX on page 2-34.
2 From the [ Device Settings ] menu, select [ System ].
2
Specify the host name.
Under "Device Settings", enter the host name in "Host Name", and then click [ Submit ].
IMPORTANT
After changing the setting, restart the network or turn the machine OFF and then ON.
To restart the network interface card, click [Reset] in the [Management Settings]
menu, and then click [Restart Network] in “Restart”.
3
2
1