Owner manual

―17―
③Connect the tip of the red and black test leads to the circuit under test
and take the reading on the display.
NOTE
● When the voltage under test measures 3% of the full scale or less,
or the frequency of the voltage is low, "LoHz" is indicated on the
display.
６−５ Resistance Measurement
DANGER
●Never use the instrument on an energized circuit.
●Do not make measurement with the battery compartment cover
removed.
●Keep your fingers and hands behind the barrier during measurement.
①Set the function selector switch to the " Ω" position.
②Slide the terminal cover to the left to disclose the V/Ω and COM
terminals. Plug the red test lead into the V/Ω terminal and the black
test lead into the COM terminal.
③With the tip of the test leads shorted together, press the Zero
Adjust/Reset button to offset the resistance of the test leads.
④Connect the tip of the test leads to the circuit under test and take the
reading on the display.