User guide

 DANGER

●Never use the instrument on a circuit above 750VAC/1000VDC.

This may cause electrical shock hazard and damage to the

instrument or the circuit under test.

● Do not make measurement with the battery compartment cover

removed.

● Do not make measurement with the test leads plugged into the

instrument.

● Keep your fingers and hands behind the barrier during

measurement.

① The PEAK mode is available on DCA, ACA, DCV and ACV

ranges.

Set the function selector switch to the desired position.

Note： Only on DCA range, press the Zero Adjust/Reset button

for about one second to zero adjust the reading with the

transformer jaws closed.

②

Press the mode selector button twice to enter from the normal

mode to the PEAK mode. "PEAK" should be shown on the display.

③Follow instructions for DCA, ACA, DCV or ACV measurement.

Note： For accurate reading, press the Zero Adjust/Reset button to

reset the reading after clamping onto the conductor or making

test lead connections to the circuit under test. Then, proceed

to measurement.

Peak Hold

INPUT Current