User guide

̶
3
̶
 WARNING
● Never attempt to make any measurement, if the instrument has
any structural abnormality such as cracked case and exposed
metal part.
● Do not turn the function selector switch with plugged in test
leads connected to the circuit under test.
● Do not install substitute parts or make any modification to the
instrument. Return the instrument to Kyoritsu or your distributor
for repair or re-ca
libration.
● Do not try to replace the battery if the surface of the instrument is
wet.
● Always switch off the instrument before opening the battery
compartment cover for battery replacement.
 CAUTION
● Make sure that the function selector switch is set to an
appropriate position before making measurement.
● Always make sure to insert each plug of the test leads fully into
the appropriate terminal on
the instrument.
● Make sure to remove the test leads from the instrument before
making current measurement.
● Do not expose the instrument to the direct sun, extreme
temperatures or dew fall.
● Be sure to set the function selector switch to the “OFF" position
after use. When the instrument will not be in use for a long period
of time, place it in storage after removing the battery.
● Use a damp cloth
and detergent for cleaning the instrument. Do
not use abrasives or solvents.