User Manual

―4―
KEW SNAP 2413F is a unique digital clamp meter for both very low
current and high current measurements. Its shielded transformers jaws
minimizes the effect of external stray magnetic field, enabling leakage
current measurements.
●Measures from 0.1mA to 1000A AC and provides frequency response
higher than 1kHz on all measuring ranges.
Measurements also possible with approximately −7% accuracy at 20
kHz on 200mA range.
●Provides a frequency selector switch ― 50/60Hz or WIDE ―to turn
on or off an incorporated low pass filter. This permits current
measurement in mains fundamental frequency only or a wide range
of frequencies, including those from such devices as inverters.
●Peak-hold facility with selectable response time of 10ms or 100 ms.
●Two-way analogue output terminal
Provides AC voltage output proportional to the current under test for
monitoring the waveform with an oscilloscope or measuring RMS
current values with a true-RMS-reading instrument.
Also convent ACA readings to DC voltage output for direct connection
to such devices as a chart recorder.
●Data hold function to allow for easy readings in hard-to-reach
locations. Display can be observed away from the conductor.
２．Features