Owner manual

6 KEW3128
1. Safety Warnings KEW3128
# CAUTION
● Always make sure to set the Range Switch to the appropriate position
before making measurement.
● Be sure to set the Range Switch to the “OFF” position after use and
remove the test leads. When the instrument will not be in use for a long
period, place it in storage after removing the battery. Instructions how
to remove a battery are described at Clause 7. Bat
tery Charging and
replacement (=>P.71).
● Do not expose the instrument to the direct sun, high temperature and
humidity or dewfall.
● Use a cloth dipped in water or neutral detergent for cleaning the instrument.
Do not use abrasives or solvents.
● When this instrument is wet, please store it after it dries.
● Remove a battery from the instrument and pack it carefully at the time of
transportation.
Symbol

Danger of possible electric shock

Instrument with double or reinforced insulation

DC

AC

Earth terminal
#
Must refer to the Instruction Manual to protect humans and devices
CAT. Ⅳ
The circuit from the service drop to the service entrance, and to the
power meter and primary overcurrent protection device (distribution
panel)