Owner manual

30 KEW3128
6. Measurement KEW3128
6.1.3 Setting for Measurement
Select a mode at Measurement Mode Selection Screen, and make
settings for measurements.
Setting items are displayed on the LCD one
by one.
Use the UP/DOWN Key and Shuttle
Switch and alter the values, and press the
ENTER Key to confirm the entry and move
to the next setting item. Pressing the ESC
Key returns to the previous item. All the
set items are displayed on the LCD once
settings are done. Press the ENTER Key
at a Confirmation Screen to get the instrument entered into a stand-by mode.
A process from making the setting to a start of measurement is displayed
at the bottom of the LCD with the corresponding stage mark flashing. The
Measurement Setting Screen is also accessible from the Menu. (=>P.37 Menu)