Owner manual

KEW3128 43
KEW3128 6. Measurement
Recall the Saved Data
Display a list of the saved data.
Then use the UP/DOWN Key or
Shuttle Switch and move the cursor
onto [LOAD], and press the ENTER
Key. The highlighted cursor is
displayed, and can be moved on the
files. Put the cursor on a desirable file
with the UP/ DOWN Key or Shuttle
Switch and press the ENTER Key.
A Confirmation Screen appears. Press
the ENTER Key to load the selected
data.
Pressing the ESC Key cancels to load
the data.
Displayed parameters are dependent on the selected files.
● Display the Logging data
The results of the saved data and the graphs of currents and resistances
can be displayed. The available operations against the displayed data
are same to that available when finishing measurements. Press the ESC
Key to return to the previous screen.
Items displayed at the top of the LCD are as follows.