Owner manual

19
Time Setting can be done in following procedure.
Select “Date/Time” with the Cursor Key on the CONFIG_SETTING Screen,
and press the “
” Key to display the Time and Date Setting Screen
(Fig.19).
(1) Time Setting
Put the cursor on “Time” and press the “
” Key to display the Time
Setting Screen (Fig.20).
Select a parameter to be changed with the Cursor Key, and press the “ ”
Key. Then the selected digit is highlighted and ready to be changed. (Fig.21)
The clock is 24-hour display.
Press the Right Cursor Key to increase numbers and the Left Cursor
Key to reduce numbers. Keep the Cursor Key pressed down to change
numbers quickly. Press the “ ” Key to confirm a number.
Repeat this procedure to change the other digits. Pressing the “ ” Key
when settings are done returns to the Time/Date Setting Screen (Fig.22).
To change the date, proceed to Step(2). Press the “ ” Key again to exit
from the setting mode and return to the CONFIG_SETTING Screen. Then
the clock starts.
Fig.
19
Fig.
20
Fig.
21
Fig.
22