Owner's manual

̶ 16 ̶
Set-up:
First, set a Bluetooth connection (pairing) from an Android device. For further
details, please refer to the instruction manual for the Android device,
“Help” for
“ KEW Smart ” or “10. Pairing with Bluetooth compatible devices” .
Communication with Android devices:
Measurement results of KEW 4202 can be displayed on Android devices via
Bluetooth communication by using the special application
“ KEW Smart ” .
Remote checking of measurements is possible without accessing KEW
4202 .
( 1 ) Communication method
Power on KEW 4202 , select a measurement function, and then clamp onto
the object to be measured.
Activate “ KEW Smart ” on the Android device and select the device to
connect from the menu. Touch the
“ Start measurement ” button on the
screen after the connection has been established. Then the measured
results will automatically be displayed on the Android device.
( 2 ) Disconnection and Stop measurement
Touch the “ Disconnect ” button on the screen to disconnect the
communication. Touch the
“ Connect ” button to reconnect.
Touch the “ Stop measurement ” button on the screen to stop measurement.
In this case, connection with KEW
4202 will not be disconnected.
For various useful functions of “ KEW Smart ” , please refer to “11. KEW Smart
Functions”
or “Help” for “ KEW Smart ” .