Owner's manual

̶ 17 ̶
9. Battery replacement
#
WARNING
󱛠
In order to avoid possible shock hazard, take off the instrument from the
conductor under test and turn off the instrument before trying to replace the
batteries.
#
CAUTION
󱛠
Do not mix new and old batteries. Never use the different kinds of batteries
at the same time.
󱛠 Install batteries in correct polarity as marked inside.
When the battery voltage warning symbol " " is displayed on the upper
left of the LCD, replace the batteries. Note that the display blanks and "
"
symbol is not displayed if the batteries are completely exhausted.
( 1 ) Stop measurement when the warning symbol appears, and um-clamp from
the object under test.
( 2 ) Ensure that the instrument is powered off.
( 3 ) Loosen the Battery cover-fixing screw on the back of the instrument.
Then remove the Battery cover.
( 4 ) Install new batteries (LR 6 or R 6 P: 4 pcs) in correct polarity as marked inside.
( 5 ) Put the Battery cover in place and tighten the screw.