Owner's manual

̶ 19 ̶
11. Features of KEW Smart (KEW4202)
Remote checking of measurements is possible without accessing KEW 4202 using
the special Android application
“ KEW Smart ” .
The application
“ KEW Smart ” is available on download site for free. (An Internet
access is required.)
Please note that communication charge is incurred separately for downloading
applications and using special features of them. For your information,
“ KEW
Smart
” is provided on-line only.
Features of KEW Smart:
󱛠 Remote checking of measurement is possible (earth/ground resistance and
AC current values)
󱛠 Data hold function (on Android devices)
󱛠 Save/ display measurement results
Measured results can be saved with comments. (max. 32 characters)
Save data includes measurement and GPS location while GPS feature has
been turned on.
󱛠 Comparator function (earth/ground resistance value)
Informs when the measured value is lower or higher than the preset value.
󱛠 Memory download function
Downloads the saved data from KEW 4202 by pressing the Memory mode
Switch
“ ” on KEW 4202 . This function can be used while the instrument
is not performing measurements.
Features available using Internet connection:
󱛠 E-mail
Measured data can be sent by E-mail while the connection to KEW 4202 is
turned off.
󱛠 Check on map
Measured locations can be checked on the Google Map if the saved data
includes GPS location.
On the Android device,
“ OPEN ” or “ NOISE ” warning will be displayed in
conjunction with KEW
4202 .
For further details, please see
“Help” for “ KEW Smart ” .
Cautions:
󱛠 Battery level of KEW 4202 is not shown on Android devices. Ensure that the
battery level of KEW
4202 is sufficient before starting to perform
measurements using these features. Replace batteries with new ones if
necessary.
󱛠 Remote control, such as switching functions or activating data hold, of
KEW
4202 from Android devices is not possible.