Instruction Manual

― 31 ―
2. Press the button when "SEt.1" is
displayed on the LCD.
3. Press the button when "SEt.2" is
displayed on the LCD.
4. "Location information":
The location no. is displayed.
Can be selected between "P.000" and "P.999".
¡
Press the button and proceed to
the next step (Auto-power-off) when not
changing the setting.
¡
To change the setting, press the
button.
Then the indication on the LCD flashes.
Press the or button to set
the value to the desired one. Then press
the button to confirm it.
Note
Location no. is linked to the location list in
PC Software and allows to display the
location name, which corresponding to the
location no., when displaying data on PC
software.
In case of setting it on the instrument, it is
recommended to take notes of the location
no. and the name.