Owner manual

Measured result at each function can be stored in the memory of the instrument.
(MAX : 300)
When KEW 6010B is in MEMORY MODE, " " is being displayed on the LCD.
9.1 How to store the data
Store the result according to following sequence.
STORE
(1) Measured result
(2) Press to enter into MEMORY MODE.
(" " appears on the LCD.)
(3) Press or and select Data No.
(000 - 299)
(4) Press . (Confirmed)
(5) Press or and select Place No.
(P.00 - P.99)
(6) Press . (Confirmed)
Stored!! To Normal mode.
(Measurement mode)
Note: By pressing MEMORY MODE SWITCH during an operation, can also
undo the last action or release MEMORY MODE.
Measurement cannot be performed when Test button is pressed in
MEMORY MODE.
― 27 ―
9. STORE / RECALL A MEASURED RESULT
Undo
Undo