Instruction Manual User Manual

4.23 KEW6305
“Setting 21” Internal memory Format
1 Use the Cursor key on the selection screen, and select “Setting 21”.
2 Then press the ENTER key to get the instrument in setting change mode.
3 The message “OFF”(not format) will blink. Change it to “ON”(format) with Cursor key.
4 When pressing the ENTER key, format will start.
(Formatting takes a few seconds.)
5 After formatting, a message “FINISH” is displayed on the LCD.
NOTE:
* All the data in the internal memory will be deleted after formatting.