Instruction Manual User Manual

7.9 KEW6305
NOTE
* Never set the Function switch to OFF position during a survey otherwise the survey may be lost.
* The file number becomes “001” when;
(1) when the file number has exceeded 999
(2) after system reset
* If the same file no. exists, the old one will be overwritten.
7.5.2 Limitations of saving
● Limitation of saving (before starting a survey)
In the following cases, a survey cannot be started (manually or automatically) by pressing the
START/STOP key.
< In case data is saved to SD card >
* When 511 files have been saved to the SD card; mark appears and further data cannot be
saved.
Some files can to be deleted via the PC, otherwise all the saved files in the SD card can be deleted
using “Setting 19” of Section 4 in this manual.
< In case the data is saved to internal memory >
* When 4 files have been saved to the internal memory; mark appears and further data
cannot be saved.
● Limitations of saving (during a survey)
When the capacity of SD card or internal memory has been exceeded during a survey; measurement
continues but mark appears on the display screen and further data will not be saved.
Press the START/STOP key 2 sec. or more and stop the survey once.
Refer to preceding page and delete the unnecessary file.
NOTE
* For further details about the capacity of the CF card and internal memory, refer to “Section 9: CF card/
Internal memory” in this manual.