Instruction Manual User Manual

7.13 KEW6305
7.6 Displayed Digits/ Over-range indication
● Digits
* Active electrical energy WP, Apparent electrical energy WS (auto-range)
: WP1/WP2/WP3, WS1/WS2/WS3 (each phase), max 6 digits
: WP, WS (total), max 6 digits
The range is automatically assigned depending on the measured value.
The decimal point and unit are changed automatically.
Unit: Wh/ VAh When the value exceeds 999999G, segment
becomes “ “.
However the saved data is not lost.
0.0000 - 99..9999
100.000 - 999.999
1000.00 - 9999.99
10.0000 k - 99.9999 k
100.000 k - 999.999 k
1000.00 k - 9999.99 k
10000.0 k - 99999.9 k
100000 k - 999999 k
1000.00 M - 9999.99 M
10000.0 M - 99999.9 M
100000 M - 999999 M
1000.00 G - 9999.99 G
10000.0 G - 99999.9 G
100000 G - 999999 G
* Elapsed time TIME
Displayed time changes with time as follows.
Elapsed time
00:00:00 ~ 99:59:59 hour: minute: second
100 ~ 999999 hour
● Over-range indication/ others
* When the input voltage and the current exceeds the max display counts, or mark is
displayed on the LCD. In this case, accurate measurement cannot be made.
* On the W range, when the P (active power) is shown by bars “- - - -”, this means that the increment
in electrical energy is insignificant.
Refer to “6-5-2 Over-range indication/ Bar indication” in this manual.