Quick Manual Instruction Manual

− 13 −

KEW6305

Measurement Ranges

5. Measurement Ranges

KEW6305 can perform the following three different measurements.

(a) Instantaneous value measurement (W Range)

(b) Integration value measurement (Wh Range)

Select a desirable Range according to the steps below.

1. Set the Function Switch to

W/ Wh/ DEMAND Range.

Set the switch to W/ Wh/ DEMAND position.

2. Select a Range

Any one of following symbols blinks on the LCD to show which Range has been selected.

e.g.: When Wh Range is selected, symbol blinks.

(a) Selecting W Range

(1) Use the Keys and select the “ W ” symbol on the LCD.

(2) Then use the Keys to switch screens (1- 3) to be displayed.

Screen 1 “-” symbol blinks on the top

Screen 2

“-” symbol blinks on the middle

Screen 3

“-” symbol blinks on the bottom

(b) Selecting

Wh or DEMAND Range

(1) Use the Keys and select the “ ” symbol while the Function switch is at the W

Range position.

(2) Press the Keys and select the Wh or DEMAND Range.

(Selecting either “Wh” or “DEMAND” Range is impossible unless “ ” symbol is not selected.)

(3) Use the Keys and switch the displayed contents.