Quick Manual Instruction Manual

− 18 −
KEW6305
KEW6305
Integration value measurement:
Wh
Range
7. Integration value Measurement:
Wh Range
7-1. Steps for measurement
Ensuring your safety
↓
Preparation for measurement
↓
Setting
↓
Wiring
↓
Integration value measurement
● Parameters for
Wh Range
Parameters to be displayed on the LCD Unit
Active
energy
(consumption)
WP : Total active energy
WP1/WP2/WP3 : Active energy of each phase
Wh
Apparent
energy
(consumption)
WS : Total apparent energy
WS1/WS2/WS3 : Apparent energy of each phase
VAh
Integration
elapsed time
TIME : Hour; Min.; Sec.
Hour; Min.
Hour
---
SET UP Range
Basic Setting Measurement setting
“Setting 01” Wiring system“Setting 09” Recording interval
“Setting 02” Voltage range
“Setting 10” Specifying rec. period or endless rec.
“Setting 03” Clamp sensor “Setting 11” Time period setting Time setting
“Setting 04” Current range “Setting 12” Time period setting Date setting
“Setting 05” VT ratio
(if necessary)
“Setting 13” Start of continuous measurement
“
Setting 06” CT ratio
(if necessary)
“Setting 14” End of continuous measurement
Range