Quick Manual Instruction Manual

− 25 −
KEW6305
KEW6305
Parameters to be saved
● Parameters to be saved
The table below shows the parameters to be saved corresponding to each measurement range.
(Parameters to be saved are different depending on wiring systems.)
Manual saving : parameters in column 1 only
(except for max/ min/ avg of each parameter)
Auto-saving : all parameters in column 1 & 2
Parameters to be saved
1
Voltage
(RMS)
Vi : voltage of each phase
Vi max : max. Vi values
Vi min : min. Vi values
Vi avg : avg. Vi values
Current
(RMS)
Ai : current of each phase
Ai max : max. Ai values
Ai min : min. Ai values
Ai avg : avg. Ai values
Active power
P : total active power Pi : active power of each phase
P max : max. P value Pi max : max. Pi values
P min : min. P value Pi min : min. Pi values
P av
g : avg. P value Pi avg : avg. Pi values
Reactive power
Q : total reactive power Qi : reactive power of each phase
Q max : max. Q value Qi max : max. Qi values
Q min : min. Q value Qi min : min. Qi values
Q avg : avg. Q value Qi avg : avg. Qi values
Apparent power
S : total apparent power Si : apparent power of each phase
S max : max. S value Si max : max. Si values
S min : min. S value Si min : min. Si v
alues
S avg : avg. S value Si avg : avg. Si values
Power factor
PF : power factor of whole system PFi : power factor of each phase
PF max : max. PF value PFi max : max. PFi values
PF min : min. PF value PFi min : min. PFi values
PF avg : avg. PF value PFi avg : avg. PFi values
Frequency
f : frequency of V1
f max : max. f value
f min : min. f value
f avg : avg. f value
Ne utr al
current
In : current on neutral
line
In max : max. In value
In min : min. In value
In avg : avg. In value
2
Active energy
(consumption)
(regenerating)
(overall)
+WP : total active energy (consumption)
+WPi : active energy (consumption) of each phase
-WP : total active energy (regenerating)
-WPi : active energy (regenerating) of each phase
#WP : total active energy (overall)
#WPi : active energy (overall) of each phase
Apparent
energy
(consum
ption)
(regenerating)
(overall)
+WS : total apparent energy (consumption)
+WSi : apparent energy (consumption) of each phase
-WS : total apparent energy (regenerating)
-WSi : apparent energy (regenerating) of each phase
#WS : total apparent energy (overall)
#WSi : apparent energy (overall) of each phase
Reactive energy
(consumption)
+WQ : total reactive energy (consumption)
Demand value
#DEM : total demand va
lue #DEMi : demand value of each phase
TARGET : target demand value
* i = 1, 2, 3
where, “max.” and “avg.” mean maximum and average values during an interval.