User Manual
Safety warnings KEW6310
9 KEW6310
W ARNING
- Connection -
● Confirm that the instrument is off, and then connect the Power cord.
● Connect the Voltage test leads and clamp sensors to the instrument first. Cord to be firmly inserted.
● Never attempt to make any measurement if any abnormal conditions, such as a broken cover or
exposed metal parts are present on the Instrument, Voltage test leads, Power cord and Clamp sensor .
- Measurement –
● Ensure that the Current input ter minal co ve r, USB connecto r co ve r an d CF card c onn ec tor co ver are
closed when no t in use durin g a measuremen t.
- Not in use for a long pe riod -
● Remove th e Power cord from the o utl et if the in stru men t w ill n ot b e in use fo r a long pe riod .
- Repair -
● Do not install substitute p art s or make any modifi cation to the instrument. Return the instrument to your
local KYORITSU distributor for repair or re-calibration in case of suspected faulty operation.
- Battery -
● Do not try to replace the batteries if the surface of the instrument is wet.
● Ensure that the Power cord, V olt age test leads and Clamp sensor are removed from the instrument,
and that the instrument is switched of f when open ing the Battery cover for battery replacement.
● Do not use dry-cell batteries with the Selector Switch set to “RECHARGEABLE BATTERY” position.
It may cause electrical shock accident.
● Neve r mix new and old batterie s .
● Install batteries in correct polari ty as marke d inside.
- Powe r cord -
● Do not use the damaged cord.
● Don’t pu t hea vy th in gs on, step on or pinc h the co rd, m oreo ver, not to touch any heating material.
● When unplugging the cord from the mains socket outlet, do so by removing the plug first and not by
pulling the Pow er cord .
- Measures against abnormal symptoms -
● If the instrument begins to emit smoke, becomes too hot, or gives off an unusual smell, immediately
power it off and di sconne ct the pow er cord from the ou tle t. Also power off the power to th e obj ect un der
test. If any anomalies as noted, contact your local KYORITSU distributor .
- Use of protective gears -
● Use insulated gloves, boots or head gears at measurements to ensure user’s safety.