User Manual
KEW6310 Safety warnings
KEW6310 10
CAUTION
● Caution should be taken since conductors under test may be hot.
● Never apply currents or voltages exceeding the maximum allowable input for the instrument for a long time.
● Don’t apply currents or voltages to V oltage test leads or Clamp sensors while the instrument is in of f status.
● Don’t use the instrument at dusty places or to be spattered.
● Don’t use the instrument under a strong electric storm or in the vicinity of energized object.
● Never give strong vibrations or drop shocks.
● Do not place or remo ve a CF card w hile CF card is being accessed. ( flashes while CF card is being
accessed.) Otherwise saved data in the card or the instrument may be damaged.
- Clamp sensor -
● Do not be nd or pu ll the ca ble of the Cl amp senso r.
- Treatment after use -
● Power off the instrument and disconnect the Power cord, V olt age test leads and Clamp sensors from
the instrument.
● Remove the ba tter ies i f th e instrumen t i s to be store d a nd w ill no t be in us e fo r a lo ng pe riod .
● Remove the C F card w hen ca rry ing the in strumen t.
● Never give strong vibrations or drop shocks when carrying the instrument.
● Do not expo se the instrumen t to direct sunlight, high temperatures, humidity or dew.
● Use a damp cloth with neutral detergent for cleaning the instrument. Do not use abrasives or solvents.
● Do not store the instrument if it is wet.
Carefully read and follow the instructions: DANGE R, W ARNING, CAUTION and NOTE ( )
described in each section.
The following symbols are used in this manual:
User must refer to the explanations in the instruction manual.
Instrument with double or reinforced insulation, Class II insulation
~ AC
(Functional) Earth terminal