User Manual

7.3.2 Integration measurement – Limitations of saving KEW6310
7.7 KEW6310
7.3.2 Limit ations of saving
Refer to “6.3.2 Limitations of saving” in this manual.
7.3.3 Saved data
Settings
FILE ID
:File name
VERSION
: V ersion info
ID NUMBER
: ID number
WIRING
: Wiring configuration
VOLT RANGE
: Volt age Ra nge
VT RATIO
:VT ratio
SENSOR TYPE
: Model name of Clamp sensor
CURRENT RANGE
: Current Range
CT RATIO
:CT ratio
CURRENT FILTER
: Current Filter
DC RANGE
: DC Range
FREQUENCY
: Frequency
INTERVAL
:Interval
START
: Saving start time
Save data
File ID : 6310-02
Saved time & date Elapsed time
Active pow er
energy
(consumption /
regenerating )
Apparent power
energy
(consumption /
regenerating )
Reactive power
energy
(consumption /
regenerating )
DATE TIME ELAPSED TIME INTEG_WP INTEG_WS INTEG_WQ
yyyy/mm/dd h:mm:ss h:mm:ss
(±)x.xxxxxE±nn
year/month/ date hour:min:sec hour:min:sec (±) value x 10
±n
* Reactive power (consumption :+ / regenerating :- ) will be recorded with phase information: lagging (i) or leading (c).
* At Wh Range, data measured at W Range and above measurement data are recorded at the same time.
1.23456E+7 =
1.23456 x 10
7
= 12345600
* e.g. of measured data