User Manual

KEW6310 8.3.2 Demand Measurement – Limitations of saving
KEW6310 8.10
* e.g. of measured data
8.3.2 Limit ations of saving
Refer to “6.3.2 Limitations of saving” in this manual.
8.3.3 Saving data
Settings
FILE ID : File name
VERSION : Version info
ID NUMBER : ID number
WIRING : Wiring configuration
VOLT RANGE : Vol t age Ra nge
VT RATIO : VT ratio
SENSOR TYPE : Model name of Clamp sensor
CURRENT RANGE : Current Range
CT RATIO : CT ratio
CURRENT FILTER : Current Filter
DC RANGE : DC Range
FREQUENCY : Frequency
INTERVAL : Interval
START : Saving start time
Save data
File ID : 6310-03
Saved time
& date
ELAPSED
TIME
Active power
energy
(consumption/
regenerating)
Apparent
power
energy
(consumption/
regenerating)
Reactive
power
energy
(consumption/
regenerating)
DEMAND TARGET
Integration INTEG_WP INTEG_WS INTEG_WQ
DATE TIME
ELAPSED
TIME
Variation
in
interval
INTVL_WP INTVL_WS INTVL_WQ
DEM TARGET
yyyy/mm/d h:mm:ss h:mm:ss
(±)x.xxxxxxE±nn (±)x.xxxE±nn
year/month/ date hour:min:sec hour:min:sec
(±) value x 10
±n
* Measured reactive power (consumption (+) / regenerating (-)) will be saved with lagging (i) / leading (c) info.
* At DEMAND Range, data measured at W Range and above measurement data are saved at the same time.
1.234E+5 =
1.234×10
5
= 123400