User Manual

11.6.3 Power quality – Data saving(Flicker) KEW6310
11.39 KEW6310
3 Manually sta rt saving da t a , or st and -by screen (WAIT) appea rs if sa ving st art date and time
has been specified.
4 Saving starts and the LED status indicator lights up.
Setting cannot be done during a data saving. Press the F4 Key to check settings.
LCD will be automatically blank in 1 min when Flicker measurements star t.
Key operation confirmation sound is disabled during measurements.
5 Press the F1 Key to stop measurement.
(At measurements with Timer function activated, this Key activates in the same way.)
6 Measurement will end and th e LED sta tu s ind ica tor goe s off
Flashes.
File name for saving data is displayed .
Flashes.
Destination to save
data will be
highlighted and
flashes in red.
File name for saving data is displayed.
Ten min
later
Screen for Preliminary
measurement is displayed.