User Manual

14.1 Input/ Output terminals KEW6310
14.1 KEW6310
14. Other functions
14.1 Input/ Output terminals
Connection
1 Press the recutangular protrusion above a terminal with a flar-blade screw driver , and insert
a signal wire.
2 Release the driver and fix the wire.
Connect wires to the proper terminals.
Wires of following dimensions can be used.
Suitable wire : single-wire Φ1.2 (A WG16), twisted wire 1.25mm
2
(AWG16),
Strand sizeΦ 0.18mm or mo re
Usable wire : single-wire Φ0.4 ~ 1.2 (A WG26 ~ 16), twisted wire 0.2 ~ 1.25mm
2
(AWG24 ~ 16)
Strand sizeΦ 0.18mm or mo re
Standard length of bare wire 11mm
In
p
ut terminal
Out
p
ut terminal
Signal wire
Flat-blade screwdriver