User Manual

KEW6310 15.2 Error messages and actions
KEW6310 15.2
Symptom Check
(6) Data cannot be saved in a
CF card.
CF card is inserted correctly?
CF card has been fo rmatted ?
Is there available space in a CF card?
Destinatio n for sa vi ng da ta is set to “CF c a rd” ?
Check the max number of files or capacity of CF card.
Confirm that the operation of CF card to be used is checked.
Verify the proper operation of CF card on other hardware.
(7) Download and setting cannot be
done via USB communication.
Confirm that:
* instrument and PC are connected with USB cord correctly,
* SET UP Range is se lecte d , and
* device are recognized on KEW PQA MASTER. A USB dri ver may not
be installed correctly if no device is recognized. See Section 13.
15.2 Error messages and actions
Error messages may appear on the LCD while using the instrument. Followings are the messages displayed
and corresponding a cti ons.
Message Detail & Action
" Cannot recognize. "
A Clamp sen so r is conn e cted prope rly to the Curren t in put te rminal
displayed with “?” mark on the LCD? press the “D e tect” Key agai n
or setting shou ld be done ma nual ly. See “4.2.1 Basic setting (Se ttin g
for Clamp sensor).
" Improper sensor is connected. ” Check the connected sensor again, and press the “Detect” Key again.
Leakage clamp sensors cannot be used at the Ch measuring power.
See “4.2.1 Basic setting (Setting for Clamp sensor).
“ No CF card ” Check the CF card is inserted correctly. See “4.2.3 Save setting”.
“ Format failed ” Confirm a CF card is inserted correctly, and format the card again.
See “4.2.3 Save setting (Formatting CF card)”.
“Some files are left undeleted. ” Try to delete the files again. See “4.2.3 Save setting”.
“ Unformatted CF card ” A CF card isn’t FAT16 format. It should be formatted.
See “4.2.3 Save setting (Formatting CF card)”.
“ Some files were not transferred.” Try to transfer the data again. See “4.2.3 Save setting (Data transfer)”.
“ No processable file ” There is no file to be deleted or transferred in the memory. See “4.2.3
Save setting”.
“ Internal memory isn’t formatte d. “ Format the in tern al mem o ry. See “4.2.3 Save setting (Formatting
Internal memory)”.
“ No save space ” Unnecessary data should be deleted or format is required. See “4.2.3
Save setting”.
- continued on the next page -