User Manual

KEW6310 4.2.1 Basic Setting
KEW6310 4.14
2 Press the Cursor Keys and select a Curren t Rang e to be used , and th en press the
ENTER Key.
3 Press the Cursor Key s and sele ct Clamp sen sors to be used at the other Ch , an d
make settings in the same way.
Settings of [Cla mp ] and [A Range] are active in fo llowing measurement s, bu t they will chang e when
preset wiring configurations are changed. The highest Range is applied to all Chs when the
[A Range] at each Ch should be harmonized due to a change of wiring configurations.
Drop down list app ears.
Selected Current Range per Ch
is displayed .
When setting for [Clamp] is done, the
upper limit of measuring range of the
selected sensor is displayed automatically.