User Manual

KEW6310 4.2.2 Measurement setting (W/Wh/DEMAND)
KEW6310 4.26
Setting for Demand inspection cycle
For the details of Demand inspection cycle, refer to “Section 8 Demand measurement” in this manual.
Demand In terval
Demand Inspe cti on Cy cle
1 sec
2 sec
5 sec
invalid
10 sec 1sec/2sec/5sec
15 sec 2sec/5sec/10 sec
20 sec 5sec/10sec/15sec
30 sec 10sec/15sec/20sec
1 min 15sec/20sec/30sec
2 min 20sec/30sec/1min
5 min 30sec/1min /2min
10 min 1min/2min /5 min
15 min 2min/5min/10 min
20 min 5min/10min/1 5 min
30 min 10min/15min /20min
1 hour 15min/20min/30min
* Default value (or after system reset) : 10 min