User Manual

KEW6310 4.2.2 Measurement Setting (Harmonic Analysis)
KEW6310 4.32
< Adopting default values >
1 Press the Cursor Keys and select [Allowable range], and then press the ENTER Key.
2 Press the Cursor Keys and select [Default Value], and then press the ENTER Key.
3 Selectable default value is displayed. Press the Cursor Keys and point [OK] to accept
the value and press the ENTER Key. Point [Cancel] with Cursor Keys, and press the
ENTER Key to se lect the value s other than the ones l isted below. (or press the ESC Key) Then
screen returns to 1. Select [Customize] and set a desirable value. See “Adopting customized
values” which indicates how to customize the values.
Drop down list app ears.
Point the cursor here.
Setting for al lo w able range
is displayed .